Levitating car "Flycar"

Levitating (model) car as attraction at student exhibition

Author: Flycar, Eyguières, France

Online since: 16/07/2012, Number of visits: 306694

For our school project "Flycar" we wanted to get a model car (283 x 95 x 90 mm, approx. 400 g) to levitate with the help of magnets that reject each other.

First, we tried to make the car levitate by itself by placing magnets underneath. But soon we realized that this will not lead to a steady levitation and the car will constantly be pushed to the side and crash down.

Then we had the idea of placing the car on a sheet of acrylic glass and set magnets into the acrylic glass. We embedded and glued a disc magnet type S-35-05-N in each corner of the sheet. We placed an identical acrylic glass sheet with the same magnets underneath on the table.

In order for the top board to levitate steadily above the bottom one, we drilled a hole at the front and the back of each board and connected them with long enough sticks.

The video shows that the top board levitates approx. 4 cm above the bottom one. We did it - we got the car to "fly"!

Articles used

S-35-05-N

Disc magnet Ø 35 mm, height 5 mm, holds approx. 12 kg, neodymium, N42, nickel-plated

	1 pc.	7,23 EUR ea.*
from	3 pcs.	6,42 EUR ea.*
from	10 pcs.	5,70 EUR ea.*
from	20 pcs.	5,34 EUR ea.*
from	40 pcs.	5,03 EUR ea.*
Ask for a rebate from 220 pcs.

Available: 53 376 pcs.

One person likes this customer project -Projects are bookmarked in your customer account

This might also interest you

keywords

Floating ( 24 )
Exhibition ( 39 )
Repelling ( 16 )
Entertaining ( 74 )

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.